Home > News > 5 Common Problems and Solutions for Electric Bicycles

5 Common Problems and Solutions for Electric Bicycles

Jan. 22, 22


The electric bicycle is a marvel of human engineering. With every engineering invention comes a manual for maintaining such equipment. E-bikes are no different in this respect, and in the context of maintenance, if we consider "e-bike maintenance", here are some very common and recurring problems.


Batteries

The battery is considered the most important component of an e-bike and damage to the battery is actually caused by improper use of the e-bike; another cause may be unsafe cleaning methods using pressurized water sources, which subsequently leads to moisture accumulation throughout the e-bike. GRANT sells waterproof power cords to help you reduce the risk of water ingress while charging.

Leaving your charger plugged in and allowing it to overcharge can shorten battery life. It is recommended that you do not leave your charger plugged in and overcharge the battery, nor expose the battery to extreme weather conditions that could negatively affect the battery.




Motor

Electric bikes have hub motors and one of the common problems may be hub motor wire noise. This is a common problem if the motor's gears, disc brakes or bearings are worn. Sometimes, loose bolts can also be the cause of this noise.

Another problem that can occur with a hub motor is that it will stop spinning. This indicates a problem with the controller. Please check that your controller is working properly and check its connection to the motor. If there are damaged parts in the controller or wiring, replace them.


Wiring and Connections

Sometimes the extreme vibrations and stresses generated by the e-bike can cause some connections to be lost, which can cause the e-bike to work improperly or make it completely inoperable. Because of these problems, it is recommended that you check the external wiring of your e-bike as regularly as you are able. Another way to take better care of your bike is to have regular maintenance checks performed by a maintenance specialist. Failure to adequately meet maintenance requirements may end up complicating the problem rather than solving it.


5 Common Problems and Solutions for Electric Bicycles


Check the cut-off switch

If your e-bike has been in an unpleasant accident and the handlebars are damaged, the motor inhibitor switch may be open due to the brake lever failing and causing the brakes to strain due to constant engagement. You will need to replace or repair your e-bike's brake lever before further use of your e-bike.

For proper brake operation and good braking, it is recommended that you check the brake pads and replace them as needed, as you do not want to gamble with others and your life. After replacing the brakes with new ones, it is recommended that you check the tension of the pulling wires to optimize the braking of your e-bike and wear some lubricant so that the wires do not wear out and cause the brakes to fail.


Dampers

E-bikes with a throttle system driving the e-bike are susceptible to damage to the throttle due to improper use of the throttle. This can cause the wire that connects the throttle to the motor to break. Acceleration of the twisted wire creates additional pressure due to sudden release of the throttle, and it is recommended that you must release the throttle slowly to prevent the wire from snapping. Replacing the wire is relatively inexpensive, so it shouldn't leave a dent in your wallet.


As the market has evolved, so has the expertise. With all the maintenance issues faced by users, experience in all areas of e-bike maintenance is increasing; therefore, it will subsequently lead to better management of the commodity. Grand is a leading manufacturer, supplier and exporter of motor extension cable and waterproof connector. With the advantages of low price, fast delivery time, and can be customized according to customer requirements, our products are used in professional fields such as new energy vehicles, solar energy, aviation, aerospace, medical care, nuclear technology, and military applications.



If you are interested in our products, please feel free to contact us. Excellent product quality and worth the price of the reference. We Looking forward to receive your inquiry. 


HOT PRODUCTS

JOIN THE GIANT NEWSLETTER!

Subcribe for New product arrivals, Market updates, and Promotional Events etc.

Suzhou Grand Electronic Technology Co., Ltd. is a high-tech enterprise that produces advanced waterproof cables. It is located in Dongshan Town, Wuzhong District, Suzhou City, China, in the Jiangsu-Zhejiang-Shanghai Economic Triangle.

Contact Us

Copyright © Suzhou Grand Electronic Tech Co., Ltd. All Rights Reserved | Sitemap | Powered by    

wechat
wechat